Type LR
   This type is used in grooves machined into the installation surface. For installation of the LM Roller, the four holes machined into the track base are used for fixing with mounting bolts. This type is suitable for places where there is no margin for the body thickness. (The installation fittings type SM and type SE also can be used.)

Type LRB
   As groove machining is not required for the installation surface, the number of machining steps is reduced. The installation fittings type SMB and type SEB are used in the same way as for the type LRA, so that secure fixing is possible.

Type LRA
   This type also is used in grooves in the same way as the type LR. The installation fittings types SM and SE are used for installation, and this compact type can be fixed securely with thick bolts.

Type LRU
   As groove machining is not required for the installation surface, the number of machining steps is reduced. For installation, the four holes machined into the track base are used for fixing with mounting bolts.

Installation Fitting Type SM/SMB/SE/SEB
   When the installation fitting type SM or SE is used, troublesome fine tapp9ing for the installation of the LM roller is not required, and the LM roller can be fixed securely. The type SE and the type SEB are equipped with wipers with double lips, so that a high dust protection effect is obtained.

Spring Pad Type PA
   When a spring pad is installed on the rear of the LM Roller and setting is made, clearance adjustment and preload adjustment can be executed easily by adjustment bolt tightening.